Howo Concrete Mixer Truck-PRODUCTS-【China Howo Trucks Factory】

Howo Concrete Mixer Truck

Introduce：

1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing board on the front taper place; double blades and guiding blades of discharge are installed on the outlet of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation of other devices (such as automobile pump).
2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame uses high intensity square tube with damping in the central area that can play role when vehicle is at full load and under the bad conditions of road, which can lower the center of gravity of truck and make it move more smoothly.
3. The upload production of this mixer adopts multiple advanced technology, which can produce various types of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3,18 m3 etc.

Technical Parameter

Truck Model	ZZ1257N3241
ENGINE	Make: SINOTRUK Diesel 4-stroke direct injection diesel engine Engine model: WD615.47, Euro II, 371HP With Oil Bath Filter System 6-cylinder in-line with water cooling, turbo-charging and intercooling Displacement: 9.726 L Optional: WD615.62 / WD615.87 / WD615.69 / WD615.47
Cabin	HW76 cab, with one sleeper and two seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver’s seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, air conditioner, with transverse stabilizer,with 4-point support fully floating suspension + shock absorber. High steel bumper, With inter-cooler fence Option: air suspension driver’s seat, high roof double bunk, fire extinguisher, warning light
Clutch	Single-plate dry coil-spring clutch, hydraulically operating with air assistance
Transmission	HW15710 / HW19710, 10F & 2R Ratio: 14.28, 10.62, 7.87, 5.88, 4.38, 3.27, 2.43, 1.80, 1.34, 1.00, 13.91(R1), 3.18(R2)
Propeller Shaft	Double universal joint propeller shaft with gear-shaped coupling flange
Front Axle	HF9, 9000 KGS Steering with double T-cross section beam Optional:HF7, 2 x 7000kgs, drum type
Rear Axle	HC16,2 x 16000 KGS Pressed axle housing, central single reduction with hub reduction and with differential locks between wheels and axles. Ratio::4.8 / 5.73 Optional:ST16,double reduction, speed ratio:3.93,4.42,4.8/ MCY13, 2 x 13000kgs
Chassis	Frame: U-profile parallel ladder frame with section of 300x80x8mm, and reinforced subframe all cold riveted cross members Front suspension:10 semi-elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension:12 leaf semi-elliptic springs, bogie spring and stabilizer
Steering	ZF power steering, model ZF8118, hydraulic steering with power assistance
Overall Dimension	820425503850mm
Mixer tank effective volume	Size:6cbm / 7cbm / 8cbm With Italian brand Bonfiglioli reduction gears, America brand Eton oil pump and motor
Brake	Service brake: dual circuit compressed air brake Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels Auxiliary brake: engine exhaust brake Optional:EVB, ABS, AUTOMATICSLACK ADJUSTER
Tyres	12.00R20,Radial (steel wire) Tires,1 spare tyre Option: 12.00-20, 12R22.5, 315/80R22.5, 12.00R24
Electrics	Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light
Instrument Panel	Active check central control with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant temperature, engine oil pressure and battery charging.
Color	Optional